The Power Rack is a winner in every sense. It’s simple design, self-spotting capability, and optional attachments make it a favourite among coaches.
Athletes can work the entire core primary and secondary strength exercises from both inside the rack and from the outer front side of the Power Rack by using the optional accessories such as the reverse
Technique Scoops and Double Bar Holders Both the front and rear uprights have Stainless steel hook-plates, this utilizes a safety slot design to prevent unintentional disengagement of the bar holder.
Both the rear upright and front uprights are adjustable to 19 positions on 7.6cm (3”) centre increments accommodating a wide range of heights Finished in highly durable, scratch resistant, electrostatic powder coat paint.
This is baked in a temperature controlled oven to completely cure and maximize the durability of the platinum sparkle finish (frame) and crinkle black (weight storage & bar holders) 1 x Combo Grip Pull-up Bar –28 mm knurled, solid cold rolled steel bar with 135-degree v-shape in the center for additional grip options.
Set at a height of 243.8cm (8ft) 2 x Double bar holders which are fully welded with replaceable plastic wear guards. These have holders on both sides so that bars can be used on the interior and exterior of the front upright or just one bar off the rear upright 2 x welded vertical bar holders to the rear of the rack and 12 x weight storage pegs
2 x Interior Safety Spot Bars – connect by hook-plate from front to rear upright for safety Inside
Dimension: Depth-71cm x Width-107cm.
Frames carry a lifetime guarantee
If you want athletes to achieve maximum results then the York Oak Lifting Platforms is where it begins
The basic yet staple Olympic moves in weight lifting are where the biggest gains are made; the Dead Lift, Squat and Cleans are crucial to massive improvements in athletic performance and overall strength and conditioning.
Using the York Lifting Platforms ensures the users are lifting on a “true” and safe surface, with that increase in confidence then its only a matter of lifting the weight that is holding them back
The Lifting Platforms centres are 105cm in width, made from 19mm Solid Red Oak and nailed to 25mm MDF board, these 2 layers sandwich a membrane, this minimises the chance or warping 6 coats of Polyurethane varnish is used to increase the longevity of the oak (and logos) and created a smooth (not slippery) lifting surface A 12-gauge steel formed 4-piece framework surrounds platforms.
These are bolted together and or bolted to the lifting racks Can be added to a lifting rack by way of a
Rack specific, 105cm wide, transition insert for use within the rack All platforms come with the required hardware for whatever application is chosen
Dimensions are based on the platform size, if you require a modular platform; please allow the dimensions of the relevant rack to be included in you measurements. 8ft x 6ft (240cm x 180cm) platform.